Question

What device is most likely to trip a circuit breaker?

Answer 1

The device that is most likely to trip a circuit breaker are high wattage devices and appliances like hair dryers, space heaters, window air conditioners, portable air conditions and even large motors and hair styling tools.

These devices can draw 1,200 watts to as much as 1,875 watts when on to generate intense heat quickly and can often exceed the circuits capacity.

Hair dryers and hair styling tools use in the range of between 1,200 watts to 1,875 watts to generate the intense heat and can trip circuit breakers, especially if the outlet is not a dedicated circuit and you have other things plugged into the same circuit.

Space heaters and AC units including portable AC units and window AC units tend to run continuously at high power levels and they also draw more power when first starting, which can also trip a circuit breaker.

Even kitchen appliances like air fryers, microwaves, blenders, toasters, deep fryers, toaster ovens etc all draw high power and high wattage and can trip circuit breakers, especially if they are not on a dedicated circuit.

Vacuum cleaners can also consume a lot of watts when on and can also trip circuit breakers.

And old or faulty appliances like older refrigerators, devices and appliances with worn or frayed cords can also trigger a circuit breaker to trip.

To prevent your circuit breaker from tripping, avoid running multiple high power devices or appliances on the same circuit and ensure that the device is in good shape and has no worn cords.

And if a breaker immediately trips after you reset it, then the device is usually defective.

But if the breaker doesn't trip then it could've just been overloaded.

If the breaker doesn't trip with the device plugged in, then the device was the fault of the breaker tripping and should not be used until it's either fixed or replaced.

Never install a bigger breaker in place of the current one as the breaker is designed to trip when overloaded and installing a larger breaker will prevent the breaker from tripping and overload the wire and cause a fire.