Question

Why does my washing machine keep tripping the breaker?

Answer 1

When your washing machine keeps tripping the breaker it's often a result of a faulty motor, electrical short in the wiring or a faulty door switch or bad internal wiring.

A faulty outlet or overloaded outlet or even water leaks onto the wiring inside the washing machine could also trip the breaker.

In washing machines that heat the water, the most common cause of a washing machine tripping the breaker is a faulty heating element, which can also leak electricity to the washing machine chassis.

A worn out motor or carbon brushes in the motor of the washing machine can also cause shorts and cause the breaker to trip.

A bad cord or even a faulty breaker or loose wiring could also cause a washing machine to trip the breaker.

Checking the amperage draw of your washing machine can also help rule out the cause of the washing machine tripping the breaker and if it's drawing too many amps it could be a result of the motor going bad.

Common devices and appliances that are likely to trip a circuit breaker are high wattage devices and appliances like hair dryers, space heaters, window air conditioners, portable air conditions and even large motors and hair styling tools.

These devices can draw 1,200 watts to as much as 1,875 watts when on to generate intense heat quickly and can often exceed the circuits capacity.

Hair dryers and hair styling tools use in the range of between 1,200 watts to 1,875 watts to generate the intense heat and can trip circuit breakers, especially if the outlet is not a dedicated circuit and you have other things plugged into the same circuit.

Space heaters and AC units including portable AC units and window AC units tend to run continuously at high power levels and they also draw more power when first starting, which can also trip a circuit breaker.

Even kitchen appliances like air fryers, microwaves, blenders, toasters, deep fryers, toaster ovens etc all draw high power and high wattage and can trip circuit breakers, especially if they are not on a dedicated circuit.

Vacuum cleaners can also consume a lot of watts when on and can also trip circuit breakers.

And old or faulty appliances like older refrigerators, devices and appliances with worn or frayed cords can also trigger a circuit breaker to trip.

To prevent your circuit breaker from tripping, avoid running multiple high power devices or appliances on the same circuit and ensure that the device is in good shape and has no worn cords.

And if a breaker immediately trips after you reset it, then the device is usually defective.

But if the breaker doesn't trip then it could've just been overloaded.

If the breaker doesn't trip with the device plugged in, then the device was the fault of the breaker tripping and should not be used until it's either fixed or replaced.

Never install a bigger breaker in place of the current one as the breaker is designed to trip when overloaded and installing a larger breaker will prevent the breaker from tripping and overload the wire and cause a fire.