To charge a Gogo Elite scooter simply plug the charger into the scooters charging port and plug the charger into the house outlet.
Allow the Gogo Elite scooter to charge for around 14 hours or until the charging indicator light turns green which means the battery is fully charged.
There are several reasons your Gogo scooter is not working such as battery being too low, the scooter not being turned on, the scooter is in freewheel mode, the scooter has a throttle trip etc.
Your Go Go Elite Traveler is beeping to indicate something is wrong that needs fixed.
The amount of beeps that your Go Go Traveler is beeping will tell you what it's beeping for.
For example 6 beeps on a Gogo traveler scooter means that you have a throttle trip.
When this occurs and you hear the 3 beeps on your Gogo scooter the throttle lever was pressed while turning on the scooter.
To fix this and stop the 6 beeps on your Gogo scooter Turn the key off.
Remove your hands from the tiller.
Turn the scooter on.
These beeps are not catastrophic; rather, they are simple reminders to ensure the travel mobility scooter maintains its impressive ability to perform.
If your Gogo scooter starts beeping after holding the throttle down for a few seconds it is likely that cruise control is turned on.
Cruise control is a P1 setting and can be turned on and off through display menu.
If Cruise control is on then the scooter will maintain its current speed after you release the throttle.