How do you stop new brakes from squeaking?

0 votes
asked Feb 23 in Repairs/Maintenance by XincaiMao (590 points)
How do you stop new brakes from squeaking?

1 Answer

0 votes
answered Feb 23 by 2bidgdade (950 points)
When your new brakes are squeaking the fix is to remove the brake pads and apply some grease to the contact points of the brake pads where the brake pads slide.

The brake pads need to slide back and forth easily and you should always apply some grease to those parts of the brake pads that slide.

Also some new brake pads need time to break in and sometimes squeaking for a few hundred miles with new brake pads is normal.

So sometimes just waiting it out and using the brakes to break the brake pads in can stop the squeaking of the new brake pads.

When new brakes are squeaking the new brakes should only squeak for the first 200 miles or 500 miles at most.

If the new brakes are squeaking after 500 miles then it would be a cause for concern and you should have the brakes checked out.

Most new brake pads are made of ceramic material which needs a slight break in period and eventually they should stop squeaking.

The reason brakes squeak after being replaced is usually due to glazed brake rotors or brake drums.

The brake drums or brake rotors could be glazed or even warped and can cause the brakes to squeak after you replace the brake pads or brake shoes.

Normally the brakes should not make any squeaking sounds when they are replaced properly.

However it can sometimes be normal for a little bit of squeaking at first for a few hundred miles of driving after the brakes are replaced.

The brakes sometimes need a bit of time to wear in on the vehicle but the brakes should not squeak a lot or should not continue squeaking after a few hundred miles.

Whenever your brake pads are replaced, your brake rotors need to be removed, measured, and machined or replaced.

Also if the mechanic failed to sand or remove the glaze, this can cause a very high-pitched squeak or squeal noise, especially when the brakes are cold.

Stuck brake calipers can also cause your brakes to squeak after the brake pads are replaced as the brake calipers may not be releasing far enough and the brake pads could still be rubbing against the brake rotors.

35,796 questions

39,185 answers

224 comments

1,387,430 users

...